Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
— Stored flight plans, procedures, and airways are called from the
database and inserted in the active flight plan. In all cases, flight
plans, procedures, and airways are considered a string of
waypoints and each waypoint in the string is inserted into the
flight plan. To insert an airway, the starting point, the airway
number, and the end point must be specified. Both the start point
and the end point must be on the airway. When inserting a stored
flight plan, the pilot specifies only the flight plan name to insert
the complete flight plan. To insert a portion of a stored flight plan,
the
entry
NAME.WAYPOINT. When a stored flight plan is inserted, flight
planning takes the active flight plan waypoint before point of
insertion and searches forward in the stored flight plan. When the
waypoint is found in the stored flight plan, the waypoints earlier
in the stored flight plan are not inserted. Flight planning also
takes the specified end point, or last waypoint of the stored flight
plan, and searches forward from the point of insertion in the
active flight plan. When found, the waypoints earlier in the active
flight plan are deleted.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 7- -10
CHANGE ACT LEG
is
made
in the
form of
FLIGHT
PLAN
Flight Plan
7-19
Advertisement
Table of Contents
