Siemens SINUMERIK 840C Installation Instructions Manual page 99

Hide thumbs Also See for SINUMERIK 840C:

Table of Contents

4 MMC Area Diagnosis

4.4.3 BEDCONF configuration file

/ / a 2 1 107 '11'

/ / a 2 1 114

4.4.3.2 Configuring file BEDCONF in directory OPERATION/PROGRAM

More user manuals on

With a main memory capacity of 16 MB the mutual exclusion of certain applica-

tions can be cancelled.

This is the case for the mutual exclusion of the optional applications WOP and

To cancel the exclusion of WOP, the following lines have already been inserted in

the BEDCONF file:

These lines are marked as comments by the characters // at the beginning of the

line and therefore have no effect.

To activate them, remove the comment characters and place them in front of the

three immediately preceding lines instead.

Because it is only possible to process the file in the user branch, the file BED-

CONF is copied there by Preset.

The text in the toggle fields for the screen form channel information for setting the

wait marks is configured in the BEDCONF file (variable a 45232).

Settings for wait mark

With the PRESET softkey, the file is copied to the user branch where it can be

edited with the ASCII editor.

Any errors in this file can lead to system failure.

Any text of maximum 10 characters can be entered in line 37 between the

speech marks.

Any changes made are stored on the hard disk using the SAVE softkey.

ManualsBase.com

//TermiSimu-

SINUMERIK 840C (IA)

Simodrive 611-d