Siemens SINUMERIK 840C Installation Instructions Manual page 690

Hide thumbs Also See for SINUMERIK 840C:

Table of Contents

SINUMERIK 840C (IA)

More user manuals on

The two displays (Picture 1/Picture 2) can be set by means of this softkey.

The displays called by means of softkey Display (Picture 1/Picture 2) can be set

in the above display. The displays can be allocated to trace buffers 1 to 4 in the

input fields marked "Picture 1" and "Picture 2". The scaling can be set separately

for each display to "automatic" (display format is automatically scaled by value

range in trace buffer) or to "manual". When "manual" is selected, the required

resolution and the offset must be entered in the appropriate input fields. The au-

tomatic setting provides an optimum visual display of the measured characteristic

between the maximum and minimum values of the measured curve. The

"manual" setting allows the resolution to be altered as required in order, for exam-

ple, to zoom part of the displayed range.

ManualsBase.com

9 Drive Servo Start-Up Application (as from SW 3)

END OF SECTION

9.6.2 SERVO trace display

Simodrive 611-d