1 Prerequisites and Visual Inspection
1.4 Installation Checklist 840C
5. Standard installation completed and
customer specific machine data entered?
6. PLC program entered and tested (safety functions)?
7. Position control loops of axes installed and the following checked:
Axis speeds / tachogenerator compensation / multigain / servo gain
(K
factor) / acceleration / exact positioning / position control loop
V
monitors / analog spindle speed / spindle positioning / traversing
ranges?
8. All conventional functions tested?
(10 mm programmed = 10 mm on machine)
Function test performed with test
program (by customer)?
9. Were backup copies made of the following data:
•
Drive machine data (611D)
•
NC machine data
•
QEC data
•
PLC machine data
•
WOP data
•
Cycle machine data
•
Cycle setting data
•
NC setting data
•
IKA data / ELG data
•
R parameters
•
Interface setting on MMC-CPU for customer devices
•
UMS (as source floppy!)
•
PLC user program + data blocks
•
Were these data deposited at the machine?
•
Have the stickers for the installed system software been stuck
on the hardware and in the log book as specified in Section 1.3,
Standard/Export version?
•
Installation checklist completely filled out (including options),
inserted in the log book and deposited at the control?
•
Were the following functions explained to the customer:
•
Drift compensation, reference point adjustment
•
Did the customer sign the installation report?
•
All data saved on HD of MMC-CPU and backup of HD
Signatures
First installation
1–8
More user manuals on
ManualsBase.com
Second installation
© Siemens AG 1992 All Rights Reserved
03.95
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
6FC5197- AA50
SINUMERIK 840C (IA)