Possible Configurations For The C Axis Mode - Siemens SINUMERIK 840C Installation Instructions Manual

06.93

Possible configurations for the C axis mode

The machine data listed below must be entered for configuring the interfaces and for format
interfacing between actual value, internal computing resolution and setpoint A more detailed
description of this machine data will be found in Section 4 and the Installation Instructions.
• Machine data for configuring the spindle interface
MD 400*
MD 455*
MD 456*
MD 458*
MD 460*
MD 462*
MD 520*
MD 521*
• Machine data for configuring the C axis interface
MD 200*
MD 308*
MD 364*
MD 368*
MD 384*
MD 564*
MD 1116*
The following diagrams give an overview of the possible input/output assignments for the C
axis mode. When configuring with two encoders and two drives, the C axis must be declared
an independent axis.
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
Spindle assignment, actual value input and servo CPU
Pulses, variable incremental weighting
Distance traversed, variable incremental weighting
Pulse multiplication for HMS
Spindle assignment, setpoint output
Cutoff frequency of spindle encoder
Configuration bits
Configuration bits
Axis assignment, actual value input and servo CPU
Cutoff frequency of C axis encoder
Pulses, variable incremental weighting
Distance traversed, variable incremental weighting
C axis assignment, setpoint output
Configuration bits (bit 5: axis is rotary axis)
Pulse multiplication for HMS
ManualsBase.com
6FC5197- AA50
12 Functional Descriptions
12.7.2 Description of the spindle modes
12–61