Siemens SINUMERIK 840C Installation Instructions Manual page 410

12.93
312*
The scale centre defines where the reference point for the alteration of the programmed axis
positions using the scale factor lies (see Programming Guide for detailed description).
The scale centre is programmed together with G51 in the block.
320*
This SD is used to define the desired clamping torque as a % of the max. torque of the
component. Input in units of 0.1 %
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
Default value Lower input limit
0 – 99 999.999
Clamping torque for move against fixed stop
Default value Lower input limit
0
ManualsBase.com
6 NC Machine Data (NC MD), NC Setting Data (NC SD)
Scale centre NC
Upper input limit
+ 99 999.999
Upper input limit
1 999
6FC5197- AA50
6.12.1 NC setting data (NC SD)
Active on
–
Units
mm or inches
Active on
–
Units
0.1 %
6–225