Siemens SINUMERIK 840C Installation Instructions Manual page 96

09.95
04.96
a 1 1 3
a 2 1 114
//a 2 1 114 '11'
//
//
a 1 1 3
a 1 1 1
a 1 1 2
a 1 1 5
a 1 1 6
a 1 1 7
a 1 5 1
a 1 5 2
a 1 5 4
a 1 5 6
a 1 5 7
a 1 7 0
i 1 2 15000
i 1 2 2207
i 1 2 2208
i 1 2 2209
i 1 2 2210
i 1 2 2211
l 1 2 16000 0
l 1 2 16001 0
l 1 5 16002 0
l 1 5 16003 .
l 1 6 16004 0
l 1 2 15010 0
l 1 2 15011 0
l 1 2 15012 0
l 1 2 15013 0
l 1 2 15014 0
Note
BAPPL CLUTLIST
BSYSFONT
BSK_NOT_CENTER
(as from SW 5.4)
BCOLORMONO_DEF

Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
More user manuals on
'0' '0'
'7' '11'
'0' '0'
'0' '0'
'12'
'0' '0'
'0' '0'
15 // BAPPLANZ
12 // BINPUTMODE
106 // BBUSY_FCOL
98 // BBUSY_BCOL
0 // BSK_NOT_CENTER
CO // BCOLORMONO_DEF
PO // BPOSNEG_DEF
MMCSYS:BIN/ // BPOSNEG_DEF
TIFF // BHARDCOPY_DEF
0 // Hardcopy File Format
3600000 // BSCREENSAVE
2 // BANZLINESMZ_DEF
0 // BAEFGCOLOR_DFLT
7 // BAEBGCOLOR_DFLT
0 // BAESATZNR_FLAG_DFLT
5 // BAESATZNR_STEP_DFLT
5 // BAESATZNR_START_DFLT
// Change to 1 only when MMC-CPU with 16MB RAM
//
// HD Bytes free
// Name for search
// Simulation
// Icon 1
// Icon 2
// Icon 3
// Icon 4
// Icon 5
The parameters described below are to be found in different lines of file
BEDCONF depending on the software version.
The parameter BAPPL CLUTLIST defines whether a CLUT list is assigned to the
area in question. Enter a "1" to activate the CLUT list assigned to this area.
The parameter BSYSFONT assigns a character set to the language which is set
in the KONFIG configuration file in the MASTER CONTROL area. The value 0 is
assigned to the European languages (Standard languages). The value 1 is assi-
gned to the Russian language (cyrillic character set). The value 2 is assigned to
the scandinavian languages (Hungarian).
With SW 4.4 and higher, the character set is defined by an entry in the configura-
tion file of the master control.
This parameter defines whether the softkey texts are to be output centered or
without any formatting. The default setting is centered. If the value is changed to
1, the centering is deactivated and the texts in the softkeys appear in the way
they have been configured.
The parameter BCOLORMONO_DEF defines whether the screen display is in
monochrome mode (enter MO) or in color mode (enter CO).
You can enter MO or CO here but be sure to enter the parameter in capital let-
ters.
ManualsBase.com
'0' '0'
'12' '13'
'0' '0'
'0' '0'
'13' '0'
'0' '0'
'0' '0'
4 MMC Area Diagnosis
4.4.3 BEDCONF configuration file
'0' // TermiIBN
'0' \
'0' \
'0' // TermiSimulation
'0' \
'0' \
'0' // TermiSimulation
4–33