Functional Description Of Gearbox Interpolation (Up To Sw 3); Corresponding Data - Siemens SINUMERIK 840C Installation Instructions Manual

12 Functional Descriptions

12.18 Functional description of gearbox interpolation (up to SW 3)

12.18
12.18.1
Machine data
• NC MD 312, 313
• NC MD 5006
• NC MD 588*/528*
• NC MD 1328*
• NC MD 1420*/487*
• NC MD 1424*/488*
• NC MD 1428*/489*
• NC MD 1432*/490*
• NC MD 1436*/491*
• NC MD 1440*/492*
• NC MD 1444*/493*
• NC MD 1448*/494*
• NC MD 1452*/495*
• NC MD 1456*/496*
• NC MD 1736*-1768*
• NC MD 1844*/525*
• NC MD 1844*/525*
• NC MD 1844*/525*
• NC MD 1844*/525*
• NC MD 1844*
• NC MD 1844*/525*
• NC MD 1848*/526*
• NC MD 1848*/526*
• NC MD 1848*
• NC MD 1848*/526*
• NC MD 1848*/526*
• NC MD 1852*/527*
• NC MD 1852*/527*
• NC MD 1852*/527*
• NC MD 1852*/527*
• NC MD 1852*/527*
• NC MD 1852*/527*
• NC MD 1856*/531*
• NC MD 2522*-2529*
12–128
More user manuals on
Functional description of gearbox interpolation (up to SW 3)
The functionality GEARBOX INTERPOLATION (GI) is
subdivided into the following 3 options:
• GI full package
• Gantry axes
• Synchronous spindle

Corresponding data

Assignment mixed I/O for emergency retraction to one mode
group
Bit 4 Key switch interlock of input display
Tilting output bit on emergency retraction
Substitute time constant of setpoint filter
Parameter for compensatory controller of following
axis/spindle, P-component
Parameter for compensatory controller of following
axis/spindle, I-component
Parameter for compensatory controller of following
axis/spindle, D-component
Time constant parallel model for following axis/spindle
Tolerance band for fine synchronism of following axis/spindle
Tolerance band for coarse synchronism of following
axis/spindle
Emergency retraction threshold for following axis/spindle
% warning threshold n
Delay controlled follow-up for following axis/spindle
Default setting for link structure
Alarm limit velocity 1st-8th PaSe
Bit 0 Axis/spindle may be FA/FS
Bit 1 Reconfiguration allowed
Bit 2 Switchover of link factor allowed
Bit 3 Overwriting of positions allowed
Bit 4 LINK_ON after Power On
Bit 5 Test bit compensatory controller
Bit 2 Block change with synchronism fine
Bit 3 Suppression of acceleration limitation
Bit 4 FA overlay, index-related
Bit 5 Block change after synchronism reached
Bit 7 Synchronization in tooth pitch
Bit 0 Reference system GI positions for synchronization
Bit 1 Include DRF and preset in calculation for synchronization
Bit 2 Include G54 to G57 in calculation for synchronization
Bit 3 Include external ZO in calculation for synchronization
Bit 4 Include G58 and G59 in calculation for synchronization
Bit 5 Include tool length compensation in calculation for
synchronization
Bit 4 Synchronization time-optimized
Alarm limit speed 1st-8th PaSe
ManualsBase.com
with the full range of functions
described below
with restrictions:
- Only 1 leading axis for each
following axis
- Fixed link factor of ±1:1
- Not NC-programmable
with the restriction:
- Only 1 leading spindle for each
following spindle
and a for following axis/spindle
max max
© Siemens AG 1992 All Rights Reserved
07.97
6FC5197- AA50
SINUMERIK 840C (IA)