Siemens SINUMERIK 840C Installation Instructions Manual page 114

Hide thumbs Also See for SINUMERIK 840C:

Table of Contents

Accessing the CD ROM via PC link software (SW 6 and higher)

Installation sequence

SINUMERIK 840C (IA)

More user manuals on

A software update can be made with PC link (SW 6 and higher). The software is

delivered on CD ROM.

10.Install the PC link on the external PC by starting the file "install.bat"

11. The control is connected to the external PC via parallel cable.

The PC link cable required for installation and startup procedures does not com-

ply with the electromagnetic compatibility requirements for cables used during

normal operations. It may therefore only be used for service purposes (parallel

transmission cable, Order No. 6FX2 002–1AA02–1AD0).

12.More about the installation sequence is explained in the "readme.txt" file in

the root directory of the CD ROM.

Select the respective menu item (Backup or Restore) in the control menu before

starting backup or restore on the external PC.

The menu items of the PC link program on the external PC

are activated as a function of the selection (Backup Re-

store, Install or Free Data Transfer) on the control.

ManualsBase.com

4 MMC Area Diagnosis

4.6 BACKUP with Valitek streamer/PC link

Simodrive 611-d