Siemens SINUMERIK 840C Installation Instructions Manual page 460

10.94
Phase current
controller gain
4 x gain set
in MD 278
293
Input of activation point for speed controller adaption. The diagram shows how the individual
machine data influence the speed characteristic (see MD 203 for diagram).
0: No speed controller adaption
1: No function assigned at present
2: Speed controller adaption activated
3: No function assigned at present
Note:
The speed controller adaption function is available only for operation in gear stage 1.
311
The I/f control is used to assist diagnosis in the event of encoder faults. The current amplitude
can be specified in this machine data.
312
The I/f control is used to assist diagnosis in the event of encoder faults. The frequency can be
specified in this machine data. The sign determines the direction of rotation.
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
MD 278
MD 337
Selection adaption speed controller motor 2
Default value Lower input limit
0
Default value Lower input limit
40.0
Default value Lower input limit
0 -800.0
ManualsBase.com
7 Drive Machine Data (SIMODRIVE Drive MD)
Upper input limit
0 7
Current with I/f control
Upper input limit
0.0 100.0
Frequency for I/f control
Upper input limit
800.0
6FC5197- AA50
7.1.2 MSD MD (data description - SW 3)
n
MD 292
Active
at once
Units
–
Active
at once
Units
%
Active
at once
Units
Hz
7–45