Siemens SINUMERIK 840C Installation Instructions Manual page 149

09.95
(1) PLC MD/Peripherals setting
Softkey
DMP configuration
Softkey Interrupts
Softkey
Process alarms
(2) PLC MD/Alarm messages
Softkey General
Softkey Channel
Softkey Axis
Softkey Spindle
(3) PLC MD/PLC basic data
Softkey Program
Softkey Interface
(4) PLC MD/User MD
Softkey User MD
Softkey Edit list/texts
(5) PLC MD/Tool management
Softkey Basic data
Softkey Magazine 1–4
(6) PLC MD/Computer link
Softkey System setting
Softkey
General functions
Softkey
Tool dialog/code carrier
(7) No explanation here

Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
More user manuals on
This softkey contains various interface DMP interface and PLC 135 WD
user machine data.
This softkey contains central and distributed interrupt machine data.
This softkey contains various process alarm machine data.
This softkey contains general message and alarm machine data.
This softkey contains channel message and channel alarm machine data.
This softkey contains axis message and axis alarm machine data.
This softkey contains spindle message and spindle alarm machine data.
This softkey contains operation block and program machine data.
This softkey contains various interface machine data.
This softkey contains user value and user bits machine data.
The User MD softkey offers facilities to the user for putting together machine data
with his own list and texts in the PLC MD area. This means that the user can see
all the PLC machine data relevant to his needs at a glance. The lists are created
by pressing the Edit list softkey and then entering texts under the Edit texts
softkey (see functional description of User displays – Edit list).
This softkey contains various tool management machine data.
This softkey contains various tool management machine data for magazines
1 – 4.
This softkey contains various system setting machine data for the computer link.
This softkey contains various function machine data for the computer link.
This softkey contains tool identifier and code carrier machine data.
ManualsBase.com
5 Machine Data Dialog (MDD – as from SW 3)
5.3.2 PLC machine data
5–21