Axis Converter/Spindle Converter (Sw 2 And Higher); Corresponding Data; General; Axis Converter - Siemens SINUMERIK 840C Installation Instructions Manual

07.97
12.17
12.17.1
• SDD 600*
SD 540* bit 0
• MD 304*

General

The function axis/spindle converter implements the assignment of the axis/spindle names of a
neutral part program to the axes and/or spindles defined in the machine. The function is
activated with MD 5186, bit 2 and MD 5006, bit 6.
This makes it possible to run the same part program on machines with different axis names as
well as on the same machine tool but with different channels.
12.17.2
12.17.2.1
If the converter is active, it converts the axis address (and address extension) in neutral part
programs into a different axis address (and address extension).
Up to 8 axes per NC channel can be converted at the same time.
Example:
X
Y4
Z10
X3
This list is stored in binary form in the setting data
SD 626*
SD 630*
...
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
Axis converter / spindle converter (SW 2 and higher)

Corresponding data

602*
604*
606*
608*
610*
612*
626*
628*
630*
632*
548*
550*
552*
568*

Axis converter

Description of function

X3
Q14
Y2
X
1st prog. axis channel-specific
2nd prog. axis channel-specific
...
ManualsBase.com
12.17 Axis converter / spindle converter (SW 2 and higher)
SD 628* 1st machine axis channel-specific
SD 632* 2nd machine axis channel-specific
... ...
6FC5197- AA50
12 Functional Descriptions
12–125