Siemens SINUMERIK 840C Installation Instructions Manual page 384

04.96
2508*-
2514*
These MD have the same meaning as MD 489*, see also "Functional Descriptions: Parameter
set switchover".
2515*-
2521*
These MD have the same meaning as MD 490*, see also "Functional Descriptions: Parameter
set switchover".
2522*-
2529*
MD 403* ff.+10%
These machine data are active only with gear interpolation.
2530*-
2537*
MD 478* ff.+10%
These machine data are active only with gear interpolation.
2546*-
2552*
These MD have the same meaning as MD 491*, see also "Functional Descriptions: Parameter
set switchover".
2553*-
2559*
These MD have the same meaning as MD 492*, see also "Functional Descriptions: Parameter
set switchover".
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
D component comp. contr. 2nd - 8th par. set as from SW 4
Default value Lower input limit
0
Time constant parallel model 2nd - 8th par. set
Default value Lower input limit
6 000
Alarm limit speed as from SW 4 1st to 8th par. set
Default value Lower input limit
Alarm limit acc. constant as from SW 4 1st to 8th par. set
Default value Lower input limit
Tol. band synchr. "fine" 2nd - 8th par. set as from SW 4
Default value Lower input limit
40
Tol. band synchr. "coarse" 2nd - 8th par. set as from SW 4
Default value Lower input limit
100
ManualsBase.com
6 NC Machine Data (NC MD), NC Setting Data (NC SD)
Upper input limit
0 16 000
as from SW 4
Upper input limit
0 16 000
Upper input limit
0 99 999
Upper input limit
0 50 000
Upper input limit
16 000
0 99 999 999 (SW5.4
and higher)
Upper input limit
16 000
0 99 999 999 (SW5.4
and higher)
6FC5197- AA50
6.9 MDs for parameter set switchover
Active on
RESET
Units
1
Active on
RESET
Units
0.01 ms
Active on
NC Stop
Units
rpm/or 0.1 rpm
Active on
NC Stop
Units
ms
Active on
RESET
Units
1 unit (MS)
Active on
RESET
Units
1 unit (MS)
6–199