Siemens SINUMERIK 840C Installation Instructions Manual page 4

SINUMERIK
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in "Remarks" column:
A . . . New documentation.
B . . . Unrevised reprint with new Order No.
C . . . Revised edition with new status.
If factual changes have been made on the page since the last edition, this is
indicated by a new edition coding in the header on that page.
Edition
11.92
06.93
12.93
10.94
03.95
09.95
04.96
08.96
07.97
01.99
09.01
This manual is included in the documentation available on CD-ROM (DOCONCD)
Edition
10.01
Trademarks
SIMATIC®, SIMATIC HMI®, SIMATIC NET®, SIROTEC®, SINUMERIK® and SIMODRIVE® are trade-
marks of Siemens AG. All other product and system names are registered trademarks of their
respective companies and must be treated accordingly.
You will find further information in the Internet under:
http://www.ad.siemens.de/sinumerik
This publication was produced on the Siemens 5800 Office
System and with Interleaf 7.
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including
rights
created by patent grant or registration of a utility model or
design, are reserved.
© Siemens AG 1993-2001
All Rights Reserved
Order No. 6FC5197-6AA50-0BP2
Printed in the Federal Republic of Germany
More user manuals on
® documentation
Order No.
6FC5197-0AA50-1BP0
6FC5197-2AA50-0BP0
6FC5197-3AA50-0BP0
6FC5197-4AA50-0BP0
6FC5197-4AA50-0BP1
6FC5197-5AA50-0BP0
6FC5197-5AA50-0BP1
6FC5197-5AA50-0BP2
6FC5197-6AA50-0BP0
6FC5197-6AA50-0BP1
6FC5197-6AA50-0BP2
Order No.
6FC5198-6CA00-0BG2
ManualsBase.com
Remarks
A
C
C
C
C
C
C
C
C
C
C
Remarks
C
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
We have checked that the contents of this publication agree with
the hardware and software described herein. The information given
in this publication is reviewed at regular intervals and any
corrections that might be necessary are made in the subsequent
printings. Suggestions for improvement are welcome at all times.
Subject to change without prior notice.
Siemens-Aktiengesellschaft