Category 2, Air Data Input Select; Category 3, Position Input Select - Honeywell BENDIX KING KMH 880 System Installation Manual

B
When selecting ID 0; Category 6, (Audio Menu Select) must select ID #1 (Alter-
nate) in order to be in compliance with TSO-C151a.

4.2.3.8.2 Category 2, Air Data Input Select

The following table provides identification of the Air Data source type. In this category
only the following parameters are to be defined:
• Gillham/Gray coded altitude or uncorrected altitude in ARINC 429 format.
Temperature, Outside Air or Static Air in analog or ARINC 429 format.
ID AIR DATA TYPE
0 0
1 1
2 2
3 3

4.2.3.8.3 Category 3, Position Input Select

The following table provides identification of the Position Source Signal. In this category,
only the following POSITION signals are to be defined:
•
Altitude
•
Date
•
Ground Speed
•
Horizontal Figure of Merit (HFOM)
•
Horizontal Integrity Limit
•
Latitude Position
•
Longitude Position
Rev 0, October/2000
NOTE
DESCRIPTION
Altitude Encoder (9 wire Gillham/Gray coded altitude) -001
Altitude Encoder (9 wire Gillham/Gray coded altitude)
with 500 ohm OAT Temperature Probe
Digital - ARINC 429
(Required Labels are 203 and 213)
Digital - ARINC 429 (with Corrected Altitude)
(Required Labels are 203,204,212,and 213)
Table 4-3 Air Data Input Select
•
•
•
•
•
•
10609I00.ZIPCDL
Sensor Status
•
Track angle
Universal Time Correlation
Vertical Figure of Merit (VFOM)
Vertical Velocity
N/S Velocity
E/W Velocity
KMH 880/KTA 870
EFFECTIVITY
App. Cfg.
-001
-001 -001
-001 -001
-001 -001
Page 4-7