ABB RELION REX640 Technical Manual page 319

1MRS759142 F
3.25.2.4 Settings
Table 352: SCHLCCH Settings
1
Parameter Values (Range)
Port n Mode
Off
On
Dedicated channel
Filter Mode Xn
Off
SMV
GOOSE
GOOSE & SMV
Goose rate limiter Xn 0.512...90.000
SMV rate limit Xn 0.512...90.000
Def. rate limit Xn 0.512...90.000
3.25.2.5 Monitored data
Monitored data is available in six locations.
• Monitoring > Communication > Ethernet > Activity > CH1LIV
• Monitoring > Communication > Ethernet > Activity > CH2LIV
• Monitoring/ > Communication > Ethernet > Activity > CH3LIV
• Monitoring/ > Communication > Ethernet > Link statuses > LNK1LIV
• Monitoring > Communication > Ethernet > Link statuses > LNK2LIV
• Monitoring > Communication > Ethernet > Link statuses > LNK3LIV
3.25.2.6 Diagnostics
Diagnostics data is available in Monitoring > Communication > Ethernet >
Diagnostics > Xn (n = 1...3).
Table 353: Diagnostic parameters for X1/LAN, X2/LAN and X3/LAN
Parameter Values (Range)
Reset counters FALSE / TRUE
GOOSE limit count 0...1000000
SMV limit count 0...1000000
Ucast limit count 0...1000000
Def. limit count 0...1000000
GOOSE limit alarm FALSE / TRUE
SMV limit alarm FALSE / TRUE
Ucast limit alarm FALSE / TRUE
Def. limit alarm FALSE / TRUE
1
n = 1...3
2
Only available for port X3
REX640
Technical Manual
Unit Step
2
Unit Step
Default Description
Mode selection for rear port(s). If
On
port is not used, it can be set to
"Off". Port cannot be set to "Off"
when
or "PRP" and port is one of the
redundant ports (LAN A or LAN
B).
Selection for message filtering
Off
10.000 Goose rate limit (Mbps)
70.000 Sampled measured values rate
limit (Mbps)
8.000 Default rate limit (Mbps)
Default Description
FALSE Reset counters command
0 Goose rate limit exceed count
0 Sampled measured values limit
exceed count
0 Unicast rate limit exceed count
0 Default rate limit exceed count
FALSE Goose rate limit exceed alarm
FALSE Sampled measured values limit
alarm
FALSE Unicast rate limit exceed alarm
FALSE Default rate limit exceed alarm
Basic functions
Redundant mode is "HSR"
319