Integrating Safety Spl User Alarms - Siemens SINUMERIK 840D sl Function Manual

Diagnostics
11.1 Troubleshooting procedure
The safety-relevant hardware checksum has only one master checksum. In the Details menu,
only one line is displayed with this checksum.
Using the "Back" softkey, you can change to the vertical softkey bar of the Safety diagnostics.
11.1.3

Integrating safety SPL user alarms

Preconditions
In order to integrate the alarm text extension for SINUMERIK Operate, the "HMI Solutionline
Alarm Text Converter" is used. Using this converter, it is possible to convert alarm text
extensions, which were already generated on an HMI Advanced or a self-generated alarm text
extension (in the *.com format) into the *.ts format required for SINUMERIK Operate, and to
integrate this using WINSCP.
The alarm text converter is included in the scope of delivery of the software
(setup_alarmtextconverter.exe).
Converting SINUMERIK Operate Safety user alarms from PCU50
Start the alarm text converter and allocate a filename under "Output File Prefix" (e.g. user_alsi).
Figure 11-26
The source directory is specified in "Source Path".
Figure 11-27
584
Allocating the file name
Selecting the source directory
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated