Siemens SINUMERIK 840D sl Function Manual page 188

Connecting sensors and actuators
8.2 Connecting I/O via PROFIsafe
configuring and parameterizing PROFIsafe components from Siemens is provided in the
SIMATIC Manuals:
References:
● ET 200S Distributed I/O System, Operating Instructions
(http://support.automation.siemens.com/WW/view/de/1144348)
● ET 200S Distributed I/O System Failsafe Modules, Installation and Operation Manual
● ET 200pro Distributed I/O System, Fail-Safe Modules, Operating Instructions
(http://support.automation.siemens.com/WW/view/de/22098524)
● Distributed I/O device ET 200eco, Fail-Safe I/O Modules, Operating Instructions
(http://support.automation.siemens.com/WW/view/de/19033850)
● ET 200M Distributed I/O device Failsafe Modules, Signal Modules Installation and
Operation Manual
(http://support.automation.siemens.com/WW/view/de/19026151)
● SIMATIC ET 200SP Distributed I/O System ET 200SP System Manual
(http://support.automation.siemens.com/WW/view/de/58649293)
● SIMATIC ET 200SP Distributed I/O System ET 200SP Equipment Manual
(http://support.automation.siemens.com/WW/view/de/90157130)
● SIMATIC Safety - Configuring and Programming, Programming and Operating Manual
(http://support.automation.siemens.com/WW/view/de/54110126)
Configuration
The F-I/O are configured while configuring the standard I/O bus configuration using STEP 7.
Parameterization
Both the standard and F-parameterization of the F-modules is carried out using the relevant
properties dialog box of the module. Select the appropriate I/O device (e.g. IM 151-1) in the
station window and then open the properties dialog box of the relevant F-module in the detailed
view.
Note
The parameter assignments specified in this chapter only refer to the ET 200 modules.
Parameters: Input/output address
The following conditions apply to the input/output addresses of an F-module:
● Input address for PLC317 PN PLC 317F
● Output address = input address
188
(http://support.automation.siemens.com/WW/view/de/27235629)
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated