Siemens SINUMERIK 840D sl Function Manual page 326

Data descriptions
9.1 Machine data for SINUMERIK 840D sl
10385
MD number
Default value: 0
Change becomes effective after: power on
Data type: DWORD
Meaning:
Special cases, errors,...
10386
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
Special cases, errors,...
10387
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
326
$MN_PROFISAFE_MASTER_ADDRESS[0...2]
PROFIsafe address of the master module
Min. input limit: 0
Defines the PROFIsafe address for the F-master NCK/PLC. This is used to uniquely assign
an F-master to an F-slave. This parameter must be entered in accordance with the
"F_source_address" parameter set in S7-ES for the F-slaves. An attempt to establish com‐
munications is only made for F-slaves that have entered this address.
Format: 0s 00 aaaa
s: Bus segment (5 = I/O connection on the PLC side)
aaaa: Hexadecimal PROFIsafe address of the F-master
$MN_PROFISAFE_IN_ADDRESS[0...47]
PROFIsafe address of an input module
Min. input limit: 0
Definition of the PROFIsafe target address of an input module
Format: 0s 0x aaaa
s: Bus segment (5 = I/O connection on the PLC side)
x: Sub-slot address
Value range: 0...2
x = 0 addresses the F-net data signals 1 ...32
x = 1 addresses the F-net data signals 33 ...64
x = 2 addresses the F-net data signals 65...96
aaaa: Hexadecimal PROFIsafe address of the F-module
$MN_PROFISAFE_OUT_ADDRESS[0...47]
PROFIsafe address of an output module
Min. input limit: 0
Protection level: 7/2
Protection level: 7/2
Protection level: 7/2
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Max. input limit: 0x0500FA7DH
Unit: -
Max. input limit: 0x0502FFFF
Unit: -
Max. input limit: 0x0502FFFFH
Unit: -
Safety Integrated