Siemens SINUMERIK 840D sl Function Manual page 335

13303
MD number
Field index 0: Default value 0
Field index 1: Default value 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
corresponds with ...
Additional reference
13304
MD number
Field index 0: Default value 0
Field index 1: Default value 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
corresponds with ...
Additional reference
13305
MD number
Default value 0
Safety Integrated
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
$MN_PROFISAFE_OUT_ENABLE_MASK[0...1]
Enable screen form of the connections to PROFIsafe outputs modules
Min. input limit: 0
min. Input limit: 0
The machine data sets of the PROFIsafe connections to PROFIsafe output modules are en‐
abled using the enable screen forms.
A machine data set includes the following data:
MD10387 $MN_PROFISAFE_OUT_ADDRESS[n]
MD10389 $MN_PROFISAFE_OUT_ASSIGN[n]
MD13301 $MN_PROFISAFE_OUT_FILTER[n]
Bit n = 0
The machine data set [n] is checked for consistency, but is however not active.
The PROFIsafe connection [n] or the slot [n] is inactive.
Bit n = 1
The machine data set [n] is active.
The PROFIsafe connection [n] or the slot [n] is active.
MD10095 $MN_SAFE_MODE_MASK, bit 1
$MN_PROFISAFE_IN_SUBS_ENAB_MASK[0...1]
Activation of the substitute value output for PROFIsafe input modules
Min. input limit: 0
min. Input limit: 0
The substitute value output for connections to PROFIsafe input modules is enabled using the
enable screen form.
Bit n = 0
For the connection parameterized in machine data set [n], the process data of the PROFIsafe
input module are transferred to the SPL input data.
The PROFIsafe connection [n] or the slot [n] is active.
Bit n = 1
For the connection parameterized in machine data set [n], the substitute values from
$MN_PROFISAFE_IN_SUBS[n] are transferred into the SPL input data.
The PROFIsafe connection [n] or the slot [n] is passive.
MD10095 $MN_SAFE_MODE_MASK, bit 1
MD13305 $MN_PROFISAFE_IN_SUBS
$MN_PROFISAFE_IN_SUBS[0...47]
Substitute values for passive connections to PROFIsafe input modules
Min. input limit: 0
9.1 Machine data for SINUMERIK 840D sl
Protection level: 7/2
Protection level: 7/2
Data descriptions
Max. input limit: FFFFFFFFH
max. Input limit: 0000FFFFH
Unit: -
Max. input limit: FFFFFFFFH
max. Input limit: 0000FFFFH
Unit: -
Max. input limit: FFFFFFFFH
335