Siemens SINUMERIK 840D sl Function Manual page 460

Data descriptions
9.2 Parameters for SINAMICS S120
r9871 SI common functions (Motor Module)
Displays the Safety Integrated monitoring functions supported on the Control Unit
and Motor Module.
The Motor Module/Hydraulic Module determines this display.
Bit 00: STO via terminals is supported
1 signal: Yes, 0 signal: No
Bit 01: SBC is supported
1 signal: Yes, 0 signal: No
Bit 02: Extended Functions supported (p9501 > 0)
1 signal: Yes, 0 signal: No
Bit 03: SS1 supported
1 signal: Yes, 0 signal: No
Bit 08: Safe Brake Adapter supported
1 signal: Yes, 0 signal: No
Bit 13: ESR delay of the pulse cancellation supported
1 signal: Yes, 0 signal: No
See also: r9771
Unit: Default value:
- -
460
Minimum value: Maximum value:
- -
Checksum: Protection level:
No 3
Data type: Effectiveness:
Unsigned32 -
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated