Siemens SINUMERIK 840D sl Function Manual page 449

p9762 SI password new
Enters a new Safety Integrated password. If the Safety Integrated password is
changed it must be acknowledged in the following parameter:
See also: p9763
Unit: Default value:
- 0000 hex
p9763 SI password acknowledgment
Confirm the new Safety Integrated password.
The new password entered into p9762 must be re-entered in order to acknowledge.
After successfully acknowledged, the new Safety Integrated password is set with
p9762=p9763=0.
See also: p9762
Unit: Default value:
- 0000 hex
r9770[0...3] SI version, safety-relevant functions integrated in the drive (Control Unit)
Displays the Safety Integrated version for the drive-integrated safety functions on
the Control Unit.
Index 0: Safety version (major release)
Index 1: Safety version (minor release)
Index 2: Safety version (base level or patch)
Index 3: Safety version (hotfix)
See also: r9870, r9890
Example:
r9770[0]=2, r9770[1]=60, r9770[2]=1, r9770[3]=0
--> safety version V02.60.01.00
Unit: Default value:
- -
Safety Integrated
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Minimum value: Maximum value:
0000 hex FFFFFFFF hex
Minimum value: Maximum value:
0000 hex FFFFFFFF hex
Minimum value: Maximum value:
- -
Data descriptions
9.2 Parameters for SINAMICS S120
Checksum: Protection level:
No 3
Data type: Effectiveness:
Unsigned32 Immediately
Checksum: Protection level:
No 3
Data type: Effectiveness:
Unsigned32 Immediately
Checksum: Protection level:
No 3
Data type: Effectiveness:
Unsigned16 -
449