Siemens SINUMERIK 840D sl Function Manual page 327

10387
Meaning:
Special cases, errors,...
10388
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
Special cases, errors,...
10389
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
Special cases, errors,...
Safety Integrated
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
$MN_PROFISAFE_OUT_ADDRESS[0...47]
PROFIsafe target address of an output module
Format: 0s 0x aaaa
s: Bus segment (5 = I/O connection on the PLC side)
x: Sub-slot address
Value range: 0...2
x = 0 addresses the F-net data signals 1 ...32
x = 1 addresses the F-net data signals 33 ...64
x = 2 addresses the F-net data signals 65...96
aaaa: Hexadecimal PROFIsafe address of the F-module
$MN_PROFISAFE_IN_ASSIGN[0...47]
Input assignment $A_INSE to PROFIsafe module
Min. input limit: 0
Assignment between an ext. SPL interface $A_INSE and a PROFIsafe input module
The SPL area data is specified in the decimal notation in the following format: aaa bbb
with aaa = area limit 1, SPL signal $A_INSE[aaa]
bbb = area limit 2, SPL signal $A_INSE[bbb]
Example:
$MN_PROFISAFE_IN_ASSIGN[0] = 001 004 or alternatively 004 001:
System variables $A_INSE[1...4] are supplied with the state of the input terminals of the PRO‐
FIsafe module, which was parameterized using MD10386 $MN_PROFISAFE_IN_AD‐
DRESS[0] and selected using MD13300 $MN_PROFISAFE_IN_FILTER[0].
$MN_PROFISAFE_OUT_ASSIGN[0...47]
Output assignment, $A_OUTSE to PROFIsafe module
Min. input limit: 0
Assignment between an ext. SPL interface $A_OUTSE and a PROFIsafe output module
The SPL area data is specified in the decimal notation in the following format: aaa bbb
with aaa = area limit 1, SPL signal $A_OUTSE[aaa]
bbb = area limit 2, SPL signal $A_OUTSE[bbb]
Example:
$MN_PROFISAFE_OUT_ASSIGN[0] = 064 061 or alternatively 061 064:
The output terminals selected in MD13301 $MN_PROFISAFE_IN_FILTER[0] of the PROFI‐
safe module parameterized using MD10387 $MN_PROFISAFE_OUT_ADDRESS[0] are sup‐
plied with the states of system variables $A_OUTSE[61...64].
9.1 Machine data for SINUMERIK 840D sl
Protection level: 7/2
Protection level: 7/2
Data descriptions
Max. input limit: 192192
Unit: -
Max. input limit:192192
Unit: -
327