Optional) Installing A Revolving Door Magnetic Lock - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
The alarm beacon must be installed on the visible side close to the equipment room door.
Procedure
Step 1 Remove the buckle from the alarm beacon mounting position.
Step 2 Route the alarm beacon cable through the door box cable hole.
Step 3 Secure the alarm beacon to the door box using two M3 screws.
Figure 7-32 Installing an alarm beacon
----End

7.8.4 (Optional) Installing a Revolving Door Magnetic Lock

Context
The BOM number for a revolving door magnetic lock is 02070037.
Procedure
Step 1 Remove the cover of the magnetic lock. The cover of the magnetic lock is located under the
mounting kit above the door. If no magnetic lock is configured, the cover is used to cover up
the magnetic lock installation position. If a magnetic lock is configured, remove the cover and
install the magnetic lock.
Issue 04 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing Monitoring Devices
143