Removing The It Cabinet Pallet - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)

3.2.2 Removing the IT Cabinet Pallet

Context
The methods for removing pallets are the same for the network cabinet, battery cabinet, and
IT cabinet. Refer to this section when removing the cabinet pallets.
Procedure
Step 1 Move the cabinet to the planned installation position.
Step 2 Remove the screws that secure the cabinet to the pallet.
Figure 3-25 Removing the screws
Step 3 Remove the cabinet from the pallet.
----End
Issue 04 (2017-06-30)
When removing the pallet for a 2000 mm high cabinet, adjust the anchor bolts counterclockwise using a
wrench until the cabinet castors come in contact with the floor so that the cabinet can be moved over the
castors.
If the cabinet needs to be secured, retain the screws you removed from the pallet for future use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation Preparations
44