Installing A Camera - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
Figure 7-17 Control skylight
(1) Camera mounting
hole

7.7.1 Installing a Camera

Prerequisites
A camera and tools for installing it have been prepared.
Context


Procedure
Step 1 Install an SD card.
1.
Issue 04 (2017-06-30)
After monitoring components are installed on the control skylight plate and cables are routed, attach

a piece of sponge to each of the two monitoring component mounting holes outside the top of the
control skylight plate to block the holes.
If no monitoring component is installed on the control skylight plate, attach sponge to the mounting

holes outside the top of the control skylight plate to block the holes.
Black sponge is available in the fitting bag of the control skylight.

The current series cameras support only micro SD cards.
For details about how to install a camera, see the documents delivered with it.
Use the wrench delivered with the camera to loosen the screws on the front cover of the
camera, remove the front cover, and take out the inner cover clipped on the lens.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Mounting hole for the multi-functional sensor or smoke
detector
7 Installing Monitoring Devices
133