Huawei FusionModule2000 Installation Manual page 153

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
After a magnetic lock is installed, the cover can be discarded.
1.
2.
3.
Figure 7-33 Removing the cover of the magnetic lock
Step 2 Remove the magnetic lock fixing plate. Remove the fixing plate from the revolving door
magnetic lock using the hex key delivered with the magnetic lock.
Four hex socket screws need to be removed in this step.
Issue 04 (2017-06-30)
Remove the cover at the rear of the mounting kit above the door, remove the four screws
at the bottom of the mounting kit, and keep the screws aside.
Remove the mounting plate of the magnetic lock cover.
Remove the four screws on the mounting plate of the magnetic lock cover, and remove
the cover of the magnetic lock.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing Monitoring Devices
144