Optional) Installing A Door Status Sensor - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-59 Setting an address
----End

2.2.7.14 (Optional) Installing a Door Status Sensor

Procedure
Step 1 Open the front and rear cabinet doors.
Step 2 Install the door status sensors on the top of the rear door and the left side of the front door of
the cabinet.
The following figure shows how to install screws on the door status sensor on the top of the
rear door.
Do not use the screws delivered with the door status sensor. Use M3 x 8 screws obtained from
the door status sensor fitting bag.
Issue 07 (2019-12-20) Copyright © Huawei Technologies Co., Ltd.
2 Installation
67