Installing A Rotating Skylight Magnetic Lock - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)



Step 3 Install adjacent skylights in the same way.
Step 4 Keep the end planes of adjacent skylight connective plates flush with each other and connect
the adjacent skylight connective plates using two M6x16 screws with flat washers and nuts.
Figure 5-10 Connecting adjacent skylight connective plates
Step 5 Install other skylights in the same way.
Step 6 Tighten the screws on the skylight connective plates.
----End

5.2.3 Installing a Rotating Skylight Magnetic Lock

Context
The BOM number of a rotating skylight magnetic lock is 02070140.
Procedure
Step 1 Remove the four M4x12 screws (set aside) from the magnetic lock fixing base and take off
the lock fixing base from the rotating skylight.
Issue 04 (2017-06-30)
The number of M6x16 screws must be the same as the number of rivet nuts on the end
plane of the skylight connective plates.
When placing a flat or rotating skylight panel, put the part with a magnetic lock fixing
base on the cabinet side.
Place the skylight based on the Keep direction label on the flat or rotating skylight.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Contained Aisles
96