GE F650 Instruction Manual page 409

7.2 IEC 61850 PROFILE FOR F650
2.5.1.2 vinGGIO
This logical node class is used is used to map the latched and self reset virtual Inputs.
GGIO class
Attribute
Name
GGIO
Data
Common Logical Node Information
Mod
Beh
Health
NamPlt
Controls
DPCSO1
DPCSO2
..
DPCSO16
SPCSO1
SPCSO2
..
SPCSO32
SPCSO33
SPCSO34
..
SPCSO64
Note:
Double control points operate on pairs of Virtual Inputs in a manner that one Virtual Input of the pair is set to "1" and the
other Virtual Input of the pair is set to "0".
For all controllable attributes in this logical node only "direct-control-with-normal-security" model of control is applicable.
7
7-40
Attribute Explanation
Type
Generic process I/O
INC Mode
INS Behaviour
INS Health
LPL Name plate
geDPC Double point controllable status
output
geDPC Double point controllable status
output
.. ..
geDPC Double point controllable status
output
SPC Single point controllable status output O
SPC Single point controllable status output O
.. ..
SPC Single point controllable status output O
SPC Single point controllable status output O
SPC Single point controllable status output O
.. ..
SPC Single point controllable status output O
F650 Digital Bay Controller
7 IEC 61850 PROTOCOL
M/O/E Notes
M Status-only
M
M
M
O Latched Virtual Input 1, 2
O Latched Virtual Input 3, 4
.. ..
O Latched Virtual Input 31, 32
Latched Virtual Input 1
Latched Virtual Input 2
.. ..
Latched Virtual Input 32
Self reset Virtual Input 1
Self reset Virtual Input 2
.. ..
Self reset Virtual Input 32
GEK-106310AB