GE F650 Instruction Manual page 57

2.4 TECHNICAL SPECIFICATIONS
Baud Rate:
Default Baud Rate
Protocols available:
Typical distance:
Isolation:
2
CAN PORT:
Rear port:
Type:
Fiber Wave length:
Fiber type:
Maximum recommended length
Isolation:
ETHERNET PORT:
Rear port:
Type (depending on model):
Model B:
Model C:
Model D:
Model E:
10/100BaseTX
100BaseFX
Wave length:
Fiber type:
Protocols available:
Typical distance:
Response time to ModBus commands: 10 ms Typical
Isolation:
In Models C and D, the 10/100BaseTX port is selected by an internal switch (see 3.3.3)
Two witness LED's for transmission and reception are included
2-28
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 y 115200 bauds
19200
®
ModBus RTU / DNP 3.0/IEC103
1200 m for cooper cable, 1000 m for glass fiber and 50 m for plastic
fiber
2 kV
CAN port in models C, M, X, Y, Z for asynchronous rear ports
Multimode glass F.O. port with ST connectors
820 nm
multimode 62.5/125 μm or 50/125 μm
for cooper cable and glass fiber
300m
2 kV
COM3
10/100BaseTX self-negotiable
10/100BaseTX + 100Base FX
10/100BaseTX + redundant 100BaseFX (Physical media redundancy)
Redundant 10/100BaseTX self-negotiable ports
RJ45 connector
ST connectors
1300 nm
multimode 62.5/125 μm or 50/125 μm
ModBus® TCP/IP
DNP over TCP/IP and UDP/IP
IEC 61850
Http, ftp, tftp (allow the use of a standard Internet browser)
1000 m for glass fiber and 300 m for RJ45 cable
2 kV
F650 Digital Bay Controller
2 PRODUCT DESCRIPTION
GEK-106310AB