7.1 IEC61850 GENERIC SUBSTATION STATE EVENT (GSSE)
7.1.1.3 REMOTE DEVICES: ID OF DEVICE FOR RECEIVING GOOSE MESSAGES
Thirty two Remote Devices, numbered from 1 to 32, can be selected for setting purposes. This setting is used to select
specific remote devices by entering the exact identification (ID) assigned to those devices. The Remote Devices can be
displayed in F650 relay:
Actual Values > Input/Outputs > Remote Inputs > Remote Device1(32)
and ONLY programmed and displayed in the EnerVista 650 Setup if remote comms setting is set to GSSE(see Figure 7–1:)
Setpoint > Input/Outputs > Remote Comms > Remote Device 1(32)
Actual > Input/Outputs > Remote Inputs > Remote Device1(32)
7
7-2
Figure 7–1: REMOTE COMMUNICATIONS
F650 Digital Bay Controller
7 IEC 61850 PROTOCOL
GEK-106310AB