GE F650 Instruction Manual page 12

1 GETTING STARTED 1.1 IMPORTANT PROCEDURES
1.1.1.2 MAGNETIC MODULE TERMINALS
1
The transformer module for the VTs and CTs is already connected to a female connector screwed to the case. The
current inputs incorporate shorting bars, so that the module can be extracted without the need to short-circuit the
currents externally. It is very important, for safety reasons not to change or switch the terminals for CTs and VTs.
AC Input Terminals
Figure 1–3: REAR VIEW OF F650 UNIT
will not be responsible for any damage of the relay, connected equipment or personnel
GE Multilin
whenever these safety rules are not followed.
GEK-106310AB F650 Digital Bay Controller 1-3