GE F650 Instruction Manual page 480

9 BOOTCODE AND FIRMWARE UPGRADE
Selection of Upgrade.txt is shown in Figure 9–30:. Select the desired "Upgrade.txt" file and click Open (Abrir) button.
7. Now a voltage range selection window will appear (Figure 9–30:). This voltage range is closely related to the serial
number of the relay. The EnerVista 650 Setup program automatically pre-selects the appropriate voltage range for the
unit based on the serial number, showing the selection with a step line square over the proper option. Click OK button.
Do not use the other option (option not square signaled) since it is dedicated to other lower firmware versions.
GEK-106310AB
Figure 9–29: FIRMWARE FILE SELECTION
Figure 9–30: AC VOLTAGE RANGE SELECTION
F650 Digital Bay Controller
9.3 FIRMWARE VERSION UPGRADE
9
9-19