GE F650 Instruction Manual page 470

9 BOOTCODE AND FIRMWARE UPGRADE
After selecting the Network adapter, a window to choose a temporary IP address will be shown. It is advisable to set the
same IP address that is going to be used lately in the relay for Ethernet connection.
8. After entering the temporary IP Address, the next new window will require the bootware file retrieved from
www.gedigitalenergy.com and previously stored someplace in the PC.
GEK-106310AB
Figure 9–10: NETWORK ADAPTER
Figure 9–11: SETTING ADDRESS
F650 Digital Bay Controller
9.2 BOOTWARE UPGRADE
9-9
9