GE F650 Instruction Manual page 479

9.3 FIRMWARE VERSION UPGRADE
6. Once the relay has been turned off and on, a new screen (Figure 9–30:) will require the firmware upgrade files
("upgrade.txt"). Wherever from this Upgrade.txt file would be obtained (www.gedigitalenergy.com or from TS Dept. at
any GE Multilin facility), then it must be saved in some directory in the root drive or in the desktop of teh PC.
If the files are downloaded from the web, they are compressed in a zip file. Proceed to extract all files and save them in the
directory just created.
9
9-18
Figure 9–27: RELAY REBOOT STEP
Figure 9–28: FIRMWARE FILE ACCEPTANCE
F650 Digital Bay Controller
9 BOOTCODE AND FIRMWARE UPGRADE
GEK-106310AB