Calibration - GE F650 Instruction Manual

6 ACTUAL VALUES
SWITCH X 11_ERROR
SWITCH X OPEN INIT
SWITCH X CLOSE INIT
SWGR X FAIL TO OPEN
SWGR X FAIL TO CLOSE
See attached figure
This screen can be accessed at Actual> Status > Calibration, and it includes the internal calibration status for the relay.
Table 6–28: CALIBRATION STATUS
FACTORY CALIBRATION: This value will be active when the relay calibration settings are the default values (no

calibration).

CALIBRATION ERROR: Error shown when there is a problem in the calibration settings (wrong values).
GEK-106310AB
Output that represents the Switchgear status 11, considered as abnormal.
Programmable input that indicates the initiation of the Opening Operation for the considered
switchgear.
Programmable input that indicates the initiation of the closing Operation for the considered
switchgear.
Output that represents a failure to open, from the associated external device (opening time
exceeded)
Output that represents a failure to close from the associated external device (closing time
exceeded)
SWITCH X OPEN
INIT
SWITCH X CLOSE
INIT
SWITCH X A
INPUT
SWITCH X B
INPUT
Switchgear logic
module
Figure 6–1: SWITCHGEAR CONTACTS
CALIBRATION
FACTORY CALIBRATION
CALIBRATION ERROR
F650 Digital Bay Controller
SWGR X FAIL TO OPEN
SWGR X FAIL TO CLOSE
SWITCH X A STATUS
SWITCH X B STATUS
SWITCH X OPEN
SWITCH X
CLOSED
SWITCH X
00_ERROR
SWITCH X
11_ERROR
6.2 STATUS
6
6.2.9 CALIBRATION
6-23