GE F650 Instruction Manual page 283

5.7 REMOTE COMMS
5.7REMOTE COMMS
This settings allow configuring the remote comms settings for the IEC61850 protocol regarding GSSE. For more
information see chapter 7.1.1 REMOTE DEVICES.
SETPOINT > INPUTS/OUTPUTS > REMOTE COMMS
SETTING DESCRIPTION
Remote comms selection
SETTING DESCRIPTION FOR GSSE
Remote comms selection
Device Identification
Hold time signal send by the
transmitting device
Snapshot Events Generation
Remote Device Description
Bit Pair Selection
Default Value Selection
SETTING DESCRIPTION FOR GOOSE
Remote comms selection
Default Value Selection
Note: X is the Remote Device index, up to 32
5
5-136
NAME
Remote Comms
Remote Comms
650 ID
Hold Time
Snapshot Events Remote Out
Remote Device X
Bit Pair X
Default Value X
Remote Comms
Default Value X
F650 Digital Bay Controller
DEFAULT VALUE STEP RANGE
NONE N/A [NONE – GSSE – GOOSE]
GSSE N/A [NONE – GSSE – GOOSE]
F650 N/A
10000 1 ms [1000 : 60000]
DISABLED N/A [DISABLED – ENABLED]
Remote Device X N/A
None N/A [DNA-1 to DNA-32 –
UserSt-1 to UserSt-64]
OFF N/A [OFF – ON – LATEST OFF
– LATEST ON]
GOOSE N/A [NONE – GSSE – GOOSE]
OFF N/A [OFF – ON – LATEST OFF
– LATEST ON]
5 SETTINGS
GEK-106310AB