Clear The No-Config Condition; Not-Authenticated; Oou-Tpt - Cisco ONS 15310-CL Troubleshooting Manual

Chapter 1 Alarm Troubleshooting
The No Startup Configuration condition applies to ML-100T-8 Ethernet cards and occurs when no
startup configuration file has been downloaded to the 15310-CL-CTX or CTX2500, whether or not you
preprovision the card slot. This alarm can occur during provisioning. When the startup configuration file
is copied to the 15310-CL-CTX or CTX2500, the alarm clears.
For more information about Ethernet cards, refer to the Cisco ONS 15310-CL and Cisco ONS 15310-MA
Note
Ethernet Card Software Feature and Configuration Guide.

Clear the NO-CONFIG Condition

Create a startup configuration for the card in Cisco IOS.
Step 1
General ML-100T-8 provisioning parameters are located in the Cisco ONS 15310-CL and
Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration Guide. The Guide also contains
information about where to find additional IOS information.
Upload the configuration file to the controller card by completing the following steps:
Step 2
a.
b.
c.
Complete the
Step 3
If the condition does not clear, log into the Technical Support Website at
Step 4
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).

1.7.179 NOT-AUTHENTICATED

The NOT-AUTHENTICATED alarm is raised by CTC (not by the NE) when it fails to log into a node.
This alarm only displays in CTC where the login failure occurred. This alarm differs from the
"INTRUSION-PSWD" alarm on page 1-79
login failures threshold.
Note NOT-AUTHENTICATED is an informational alarm and is resolved when CTC successfully logs into the
node.

1.7.180 OOU-TPT

78-17235-01
In node view, right-click the ML-100T-8 Ethernet card graphic.
Choose IOS Startup Config from the shortcut menu.
Click Local > CTX and navigate to the file location.
"Soft- or Hard-Reset an Ethernet or Electrical Card in CTC" procedure on page
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
SONET Logical Object: SYSTEM
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: STSTRM, VT-TERM
in that INTRUSION-PSWD occurs when a user exceeds the
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1.7.179 NOT-AUTHENTICATED
1-154.
1-113