Inhswpr; Clear The Inhswpr Condition; Inhswwkg; Intrusion-Pswd - Cisco ONS 15310-CL Troubleshooting Manual

Sonet multiservice platforms
Hide thumbs Also See for ONS 15310-CL:
Table of Contents

Advertisement

Chapter 1
Alarm Troubleshooting

1.7.116 INHSWPR

The Inhibit Switch To Protect Request on Equipment condition occurs on traffic cards when the ability
to switch to protect has been disabled. If the port is part of a 1+1 protection scheme, traffic remains
locked onto the working system.

Clear the INHSWPR Condition

If the condition is raised against a 1+1 port, complete the
Step 1
procedure on page
If the condition does not clear, log into the Cisco Technical Support Website at
Step 2
http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).

1.7.117 INHSWWKG

The Inhibit Switch To Working Request on Equipment condition occurs on ONS 15310-MA traffic cards
when the ability to switch to working has been disabled. If the card is part of a 1+1 protection scheme,
traffic remains locked onto the protect system.
If the condition is raised against a 1+1 port, complete the
Step 1
procedure on page
If the condition does not clear, log into the Cisco Technical Support Website at
Step 2
http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).

1.7.118 INTRUSION-PSWD

The Security Intrusion Incorrect Password condition occurs after a Superuser attempts a settable number
of unsuccessful logins, a login with an expired password, or an invalid password. The alarmed user is
locked out of the system, and INTRUSION-PSWD condition is raised. This condition is only shown in
Superuser login sessions, not in login sessions for lower-level users. The INTRUSION-PSWD condition
is automatically cleared when a settable lockout timeout expires, or it can be manually cleared in CTC
by the Superuser if lockout is permanent.
78-17235-01
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA) for ONS 15310-MA
SONET Logical Object: EQPT
1-149.
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA) for ONS 15310-MA
SONET Logical Object: EQPT
1-149.
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: NE
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
"Initiate a 1+1 Manual Switch Command"
"Initiate a 1+1 Manual Switch Command"
1.7.116 INHSWPR
1-79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15310-ma

Table of Contents