No Resource Call Reject Thresholds; Configuring No Resource Call Reject Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Call Setup Thresholds

No Resource Call Reject Thresholds

No resource call reject thresholds generate alerts or alarms based on the total number of calls that were rejected by the
system due to insufficient or no resources (CPU, memory, etc.) during the specified polling interval.
Alerts or alarms are triggered for no-resource-rejected calls based on the following rules:
Enter condition: Actual number of calls rejected due to no resources > or = High Threshold
Clear condition: Actual number of calls rejected due to no resources < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring No Resource Call Reject Thresholds

Use the following example for configuring no resource call reject thresholding:
configure
threshold call-reject-no-resource <high_thresh> [ clear <low_thresh> ]
threshold poll call-reject-no-resource interval <time>
threshold monitoring call-setup
end
OL-25552-02
No Resource Call Reject Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
39