Cisco ONS 15310-CL Troubleshooting Manual page 313

Chapter 1 Error Messages
Table 1-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-6024 The destination of a {0} route cannot be a class D (224.0.0.0/4)
or class E (240.0.0.0/4) address.
EID-6025 The destination of a {0} route cannot be a class A broadcast
address (x.255.255.255/8)
EID-6026 The destination of a {0} route cannot be a class B broadcast
address (x.x.255.255/16)
EID-6027 The destination of a {0} route cannot be a class C broadcast
address (x.x.x.255/24)
EID-6028 The destination of a {0} route cannot be the subnet broadcast
address associated with a node IP address.
EID-6029 The next hop of a static route cannot be the same as the
destination of the route or an internal network{0}.
EID-6030 The next hop of a static default route must be the provisioned
default router.
EID-6031 No more static routes can be created.
EID-6032 This static route already exists.
EID-6033 Previous operation is still in progress.
EID-6035 Parent entity does not exist.
EID-6036 Parent PPM entity does not exist.
EID-6037 Equipment type is not supported.
EID-6038 Invalid PPM port.
EID-6039 Card is part of a regeneration group.
EID-6040 Out of memory.
EID-6041 Port is already present.
EID-6042 Port is used as timing source.
EID-6043 DCC or GCC is present.
EID-6044 Card or port is part of protection group.
EID-6045 Port has overhead circuit(s).
EID-6046 G.709 configuration is not compatible with data rate.
EID-6047 Port cannot be deleted because its service state is
OOS-MA,LPBK&MT.
EID-6048 {0} is {1}.
78-17235-01
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Description
The destination of a static route must not be
a class D or class E address.
The destination of a static route must not be
a class A broadcast address. It should be
(xxx.0.0.0).
The destination of a static route must not be
a class B broadcast address.
The destination of a static route must not be
a class C broadcast address.
The destination of a static route must not be
a subnet broadcast address of a node IP.
Static route must have the default route as
the next hop, and not destination of the
route or internal network.
The default route is selected for networks
that do not have a specific route.
You have reached the maximum number of
static routes.
Refer to the error message text.
Another operation is in progress. You must
try after sometime.
Refer to the error message text.
Create a parent entity for the PPM.
CTC does not support this equipment.
Refer to the error message text.
Select another card.
Refer to the error message text.
Refer to the error message text.
Choose another port because the selected
port is being used as a timing source.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
To delete the port, you must change the port
state to OOS-DSBLD.
The trunk port is in the wrong state to carry
out the action.
1-37