Cisco ONS 15310-CL Troubleshooting Manual page 283

Chapter 1 Error Messages
Table 1-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-2066 Unable to store profile. Error writing to {0}.
EID-2067 File write error. {0}
EID-2068 Unable to load alarm profile from node.
EID-2069 File not found or I/O exception.
(No such file or directory)
EID-2070 Failure deleting profile. {0}
EID-2071 Only one column may be highlighted.
EID-2072 Only one profile may be highlighted.
EID-2073 This column is permanent and may not be removed.
EID-2074 Select one or more profiles.
EID-2075 This column is permanent and may not be reset.
EID-2077 This column is permanent and may not be renamed.
EID-2078 At least two columns must be highlighted.
EID-2079 Cannot load alarmables into table. There are no reachable nodes
from which the list of alarmables may be loaded. Please wait
until such a node is reachable and try again.
EID-2080 Node {0} has no profiles.
EID-2081 Error removing profile {0} from node {1}.
EID-2082 Cannot find profile {0} on node {1}.
EID-2083 Error adding profile {0} to node {1}.
EID-2085 Invalid profile selection. No profiles were selected.
EID-2086 Invalid node selection. No nodes were selected.
EID-2087 No profiles were selected. Please select at least one profile.
EID-2088 Invalid profile name.
EID-2089 Too many copies of {0} exist. Please choose another name.
78-17235-01
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Description
CTC encountered an error while trying to
store the profile.
CTC encountered an error while writing the
specified file.
CTC encountered an error trying to load the
alarm profile from the node.
Either the specified file was not found, or
there was an input/output exception.
There was a failure in deleting the specified
profile.
You cannot select more than one column
during clone action.
You cannot select more than one profile.
You cannot delete a permanent column.
You have not selected any profile or
column. Reset operation is done by
right-clicking the selected column.
A permanent column is non resettable.
You cannot rename a permanent column.
You connot compare two profiles unless
you select two columns.
Refer to the error message text.
The specified node does not have any
profiles.
There was an error while removing the
specified profile from the specified node.
CTC cannot find the specified profile from
the specified node.
There was an error adding the specified
profile to the specified node.
You tried to select an invalid profile. Select
another profile.
You tried to select an invalid node. Select
another node.
Refer to the error message text.
The profile name cannot be empty.
Select a unique name.
1-7