Cisco ONS 15310-CL Troubleshooting Manual page 298

Table 1-1 Error Messages (continued)
Error Warning
ID Error Warning Message
EID-3165 The Ring ID provided is already in use. Ring IDs must be
unique
EID-3166 Error refreshing {0} table
EID-3167 Slot already in use
EID-3168 Provisioning Error
EID-3169 Error Adding Card
EID-3170 Cannot delete card, {0}
EID-3171 Error creating Trap Destination
EID-3172 No RMON Thresholds selected
EID-3173 The contact "{0}" exceeds the limit of {1} characters.
EID-3174 The location "{0}" exceeds the limit of {1} characters.
EID-3175 The operator identifier "{0}" exceeds the limit of {1}
characters.
EID-3176 The operator specific information "{0}" exceeds the limit of
{1} characters.
EID-3177 The node name cannot be empty.
EID-3178 The name "{0}" exceeds the limit of {1} characters.
EID-3179 Protect card is in use.
EID-3180 1+1 Protection Group does not exist.
EID-3181 Y Cable Protection Group does not exist.
EID-3182 The Topology Element is in use and cannot be deleted as
requested
EID-3183 Error Deleting Protection Group
EID-3184 No {0} selected.
EID-3185 There is a protection switch operation on this ring. Therefore,
it cannot be deleted at this time.
EID-3186 Busy: {0} is {1} and cannot be deleted as requested.
EID-3187 Error deleting trap destination.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1-22
Chapter 1
Description
Refer to the error message text.
CTC encountered an error while refreshing
the specified table.
Refer to the error message text.
An error was encountered while attempting
the specified provisioning operation. Refer
to the details portion of the error dialog box
for more information.
CTC encountered an error while adding the
card.
Refer to the error message text.
CTC encountered an error creating the trap
destination.
Select an RMON threshold.
The specified contact exceeds the specified
character limit.
The specified location exceeds the specified
character limit.
The specified operator identifier exceeds
the specified character limit.
The specified operator specific information
exceeds the specified character limit.
The specified name is empty.
The specified name exceeds the specified
character limit.
Refer to the error message text.
Create a 1+1 protection group.
Refer to the error message text.
You cannot delete the topology element
which is in use.
CTC encountered an error while deleting
the protection group.
You must select an item before completing
this task.
Refer to the error message text.
The request cannot be completed.
CTC encountered an error deleting the trap
destination.
Error Messages
78-17235-01