Fe-Ds1-Nsa; Clear The Fe-Ds1-Nsa Condition; Fe-Ds1-Sa; Clear The Fe-Ds1-Sa Condition - Cisco ONS 15310-CL Troubleshooting Manual

1.7.75 FE-DS1-NSA

Step 4 If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.75 FE-DS1-NSA
The Far End DS-1 Equipment Failure Non-Service-Affecting (NSA) condition occurs when a far-end
15310-CL-CTX, ONS 15310-MA DS1-28/DS3-EC1-3, or ONS 15310-MA DS1-84/DS3-EC1-3 DS-1
port equipment failure occurs, but does not affect service because the port is protected and traffic is able
to switch to the protect port.

Clear the FE-DS1-NSA Condition

To troubleshoot an FE condition, determine which node and card link directly to the port reporting the
Step 1
FE alarm.
Log into the node that links directly to the port reporting the FE condition.
Step 2
Clear the main alarm. Refer to the appropriate alarm section in this chapter for troubleshooting
Step 3
instructions.
If the condition does not clear, log into the Technical Support Website at
Step 4
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).

1.7.76 FE-DS1-SA

The Far End DS-1 Equipment Failure Service Affecting condition occurs when there is a far-end
equipment failure on a 15310-CL-CTX, ONS 15310-MA DS1-28/DS3-EC1-3, or ONS 15310-MA
DS1-84/DS3-EC1-3 DS-1 port that affects service because traffic is unable to switch to the protect port.

Clear the FE-DS1-SA Condition

Step 1 To troubleshoot an FE condition, determine which node and card link directly to the port reporting the
FE alarm.
Log into the node that links directly to the port reporting the FE condition.
Step 2
Clear the main alarm. Refer to the appropriate alarm section in this chapter for troubleshooting
Step 3
instructions.
If the condition does not clear, log into the Technical Support Website at
Step 4
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1-60
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
Chapter 1 Alarm Troubleshooting
78-17235-01