1.7.79 FE-DS3-SA
1.7.79 FE-DS3-SA
The Far End DS-3 Equipment Failure Service-Affecting condition occurs when there is a far-end
equipment failure on a 15310-CL-CTX, ONS 15310-MA DS1-28/DS3-EC1-3, or ONS 15310-MA
DS1-84/DS3-EC1-3 DS-1 port that affects service because traffic is unable to switch to the protect port.
Clear the FE-DS3-SA Condition
To troubleshoot an FE condition, determine which node and port link directly to the card reporting the
Step 1
FE alarm.
Log into the node that links directly to the port reporting the FE condition.
Step 2
Clear the main alarm. Refer to the appropriate alarm section in this chapter for troubleshooting
Step 3
instructions.
If the condition does not clear, log into the Technical Support Website at
Step 4
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.80 FE-EQPT-NSA
The Far End Common Equipment Failure condition occurs when a Non-Service-Affecting (NSA)
equipment failure is detected on a far-end 15310-CL-CTX, ONS 15310-MA DS1-28/DS3-EC1-3, or
ONS 15310-MA DS1-84/DS3-EC1-3 DS-1 port.
Clear the FE-EQPT-NSA Condition
Step 1
To troubleshoot an FE condition, determine which node and port link directly to the card reporting the
FE condition.
Step 2
Log into the node that links directly to the port reporting the FE condition.
Step 3
Clear the main alarm. Refer to the appropriate alarm section in this chapter for troubleshooting
instructions.
Step 4
If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.81 FE-FRCDWKSWBK-SPAN
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
1-62
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: OCN
Chapter 1
Alarm Troubleshooting
78-17235-01