ECC800 Data Center Controller
User Manual
----End
6.9.2 Third-party NMS Management (over SNMP)
6.9.2.1 Connecting the Communications Cable
Procedure
Step 1 Connect the communications cable to the WAN_1 port on the ECC800.
Figure 6-53 Connecting the communications cable
----End
6.9.2.2 Setting SNMP Management Parameters
Prerequisites
Before setting SNMP parameters, obtain the information listed as follows from the NMS.
Issue 05 (2019-09-16)
Figure 6-52 Page for managing transparent transmission channels
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
162