Huawei ECC800 User Manual page 81

ECC800 Data Center Controller
User Manual
Indicato
r
ALM
PWR
Networking Switch
Table 3-65 Networking switch description
Name
Button pressing
Button pressing
Issue 05 (2019-09-16)
Colo Meaning
r
Red Alarm
indicator
Green Power
indicator
 If an indicator blinks at long intervals, it is blinking at 0.5 Hz, that is, on for 1s and then off for 1s.
 If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and then off for
0.125s.
 If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
Blinking intermittently at super short intervals means an indicator blinks at super short intervals for

0.5s and then remains off for 0.5s.
Definition
Press the button for less
than 1s.
Press and hold the button
for more than 1s but less
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The actual number
of online devices is
less than the value
of iBAT number.
Off The actual number
of online devices
equals the value of
iBAT number.
Steady on Board power
indicator.
Function
iBOX blinking function
Creates a network if no network has
been created. Switches between network
3 Device Description
Measure
2. Check
whether the
device is
malfunctioni
ng.

If yes,
replace
the
device.

If no,
contact
Huawei
technical
support.
Check the value
of iBAT number,
the iBAT cable
connection, and
the iBAT
indicators.
Requires no
handling.
Requires no
handling.
71