How Can I View Performance Data; How Is A Signal Name Changed; How Can I Export Historical Data And Device Data - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

8.1.16 How Can I View Performance Data?

Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Query > Performance Data.
Step 3 Set Device, Performance data, Statistics mode, Start time, and End time, and click Query.
----End

8.1.17 How Is a Signal Name Changed?

Context


Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > Signal Name Modify. The Batch Signal Configuration page is
displayed.
Step 3 Set Device type to ECC800, set Device name to ECC800, and click OK.
Step 4 On the query result tab page, set the new signal name of AI/DI_3 to Smoke and click
Submit.
Step 5 Choose Monitoring > System > ECC800 > Running Parameters > AI/DI_3 Port Settings.
Check that the signal name of AI/DI_3 has been changed to Smoke.
----End

8.1.18 How Can I Export Historical Data and Device Data?

Context



Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Select Query > Export Data.
Issue 05 (2019-09-16)
In this example, the smoke sensor is connected to the AI/DI_3 port on the ECC800.
The following procedure describes how to change the signal name of AI/DI_3. Other
signal names can be changed in a similar way.
Export Historical Data: You can export historical alarms, active alarms, performance data,
operation logs, and access events of the system for viewing and analyzing events.
Export Device Data: You can export device data in system.
If Encryption Password is selected, the exported data package will be encrypted, and
you need to enter the encryption password to decompress the data package. To ensure
data security, you are advised to select Encryption Password.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
232