How Can I View Version Information; How Do I Set The Date And Time - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 8-2 Performance parameter setting page
Step 3 Set device performance parameters, select the performance parameters to be submitted in the
first column, set Collecting Data, and click Submit. After the parameters are successfully
submitted,
of parameters that are successfully changed and failed to be changed are displayed beside
Submit.
Step 4 Select the All Configured Data tab page to view the configured device performance
parameters.
----End

8.1.3 How Can I View Version Information?

Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Click
information.
Step 3 Choose Maintenance > Version Information and view the version information of ECC800
and connected device.
----End

8.1.4 How Do I Set the Date and Time?

Procedure
Step 1 Choose System Settings > System Parameters > Time.
Step 2 Set the time zone, date, and time or click Obtain Local Time, and click Submit.
Step 3 (Optional) If the NTP server is used for time synchronization, select NTP server sync, set
NTP primary server IP, NTP backup server IP, Port number, and Sync interval (min),
and click Submit.
----End
Issue 05 (2019-09-16)
is displayed in the setting result of the changed parameters, and the numbers
in the upper right corner of the home page and view the ECC800 version
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
176